7/15/20/40W Laser Engraver 45*40cm Working Area Laser Cutter Engraver With 32-Bit Motherboard For Metal Wood Engraving

• 45*40cm working area and appearance upgrade

The overall working area is the largest 45*40cm, 2020 aluminum profile frame + structured wiring, the structure is firm and light, the operation is smooth, and the appearance is beautiful.

• 32Bits MCU dedicated motherboard

It can preprocess 32 instructions, support baud rate as high as 921600, support greater current passing, and work at high speed and efficiency. GRBL1.1F firmware is smarter, faster, more accurate and easier to use.

• The main board is equipped with gyroscope and buzzer

Ensure that the machine runs well and has higher safety. Keep the machine running stably, and when necessary, a safety alarm will be issued.

• With 7/15/20/40W laser

The laser is equipped with an external driver, which is clearly visible. With switch, the operation is more convenient. More professional integrated board, stable performance. The 20w/40w laser head adds a green protective cover, which effectively reduces the damage of the laser to the eyes.

• GRBL software universal

This laser engraving machine is compatible with various popular engraving software such as LaserGRBL (provided for free after placing an order), LightBurn (paid software). The most important thing is that it supports computer operating systems such as Windows XP, 7, 8, 10, Mac, and Linux.

• Pre-assembled parts

The semi-finished product is shipped, and the machine can be installed within 10-20 minutes after receipt. Connect the laser engraving machine to the computer to print, engrave and cut.

• Detail optimization

USB line interface adopts Type-C interface;

The new lifting plate can be matched with lasers of different sizes, and the up and down lifting space is larger.

The USB cable and offline can be connected at the same time, but the USB connection will be prioritized.

A braided net is used to collect the cables, so the cables will not hang down in the work area.

• Motherboard: 32-bit motherboard, 32-bit MCU

• Firmware: GRBL1.1F

• Operating system: Windows (using LaserGRBL), MAC OS and Linux (using LightBurn)

• Laser module power: 7W, 15W, 20W, 40W

• Wavelength: 450±5nm

• Input format: NC, BMP, JPG, PNG, DXF, etc.

• Carving area: X: 450MM x Y: 400MM

• Engraving speed: 3000MM/Min and below

• Picture size: unlimited (pixel accuracy can be adjusted freely, the default is 300 pixels per inch, about 0.81um pixel accuracy)
  
  

Packet listing

• 1* engaver machine (with 2 customized limited switch)

• 1* laser module (7/15/20/40W）

working area 450*400mm

2020 high quantity aluminum profile frame

structured wiring

32-Bits Motherboard Security alert reminder

7W/15W/20W/40W Laser

Higher Engraving Accuracy

Ability TO Cut Thicker Objects

Laser Shield To Protect Eyes

Support More Material Engraving

PRODUCT DETAILS

Engraving effect display

Note:
● Please wear goggles when operating the laser engraver. Wear safety goggles to avoid blindness.
● Please do not touch the laser emitter with your hand, or it may burn your hand.
● Please avoid strong impact on the machine.
● Children under 14 are not allowed to use this product and children over 14 need adult supervision.
● The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.
● This product is not recommended for industrial cutting due to its high engraving speed.