80W Laser Engraver Actual Output Power 10w Laser Cutter Cutting Machine Wood Router with 32-bit Controller LaserGRBL(LightBurn)
SPECIFICATIONS
actual output Power: 5W/10W
Working Area: 40*40cm
System: Wins/mac OS/ Linux
Software: LaserGRBL/Lightburn
Origin: Mainland China
Laser type: 2 diodes
Conttroller: 32 bit
Certification: ce
Brand Name: annoytools
Beam: 2*LD-FAC+C-LENS
Advantage
Model: 400*400mm Laser Engraver Machine
Laser power: 5W-10W
Working area: 400*400mm MAX
Install 80W 40mm laser : 380*380mm working area
2axis controller
32 bits motherboard with 32 Bits MCU ,It can process 32 instructions at a time, greatly increasing the file processing speed
Laser power range could be S0 - S1000
Larger power adjustment range, freely adjust according to your needs: If you want the ax power, just set minS999,max1000
The Maximum speed 10000mm/min
( If do not consider the laser carving result, the velocity of movement could be as high as 60000mm/min)
Active Position Protection: It will be turned on with a strong alarm sound in these three cases
1. Machine was moved during working
2. USB cable disconnect
3. Power≥1,the laser turn on > 5S still not start working.
One motor Y axis
Single motor setting, one drive module corresponds to one motor, which can increase the current while reducing the weight of the machine body and improve the running speed of the machine
Limit switch: XY axis limit switch
Protect the normal operation of the machine
Exposure Duration Detection and Limitation
If laser engraver is under control without anybody notice, it will be turned on to make the machine stop working.
X-axis adopts eccentric nut design
This machine uses eccentric nuts to avoid X-axis shaking, making the machine more stable
Sliding module
This machine adds a slider on the X axis to install the laser and has better heat dissipation, which is helpful for the adjustable focus laser to adjust the focus, and it is easier to replace the laser
Machine wire management
Make the machine cable clean and not entangled, more beautiful and convenient
Offline
If connect offline and USB together, the machine will choose USB; only connect offline separate, the machine will work offline
Semi-assembled delivery
Reduce assembly time and be more friendly to newcomers
Laser Wavelength: 445nm (blue viole)
Optical Power Output:10W
Drive mode: External ACC constant current drive
Cooling Method: Forced air cooling
Operating Voltage: 12V DC
Shell Material: Aluminum,Surface Anodized
Module Material: Copper
Life Time:16000 hours
Working Temperature:-40-75Celsius
Focal Length: 50mm
Packing List:
1*Machine kit
1* 5.5W/10w laser
1* Goggles
1* Manual